Beschreibung
The Audio-Technica AT4022 Omnidirectional Condenser Microphone features a low-profile design and small-diaphragm condenser element. The sensitivity, frequency response and SPL capabilities make it a suitable choice for speaker cabinets, vocals, percussion instruments, drums and „spot“ placement on guitars, stringed instruments, etc. The omnidirectional polar pattern provides a wide pickup area and preserves the integrity of the signal. An 80Hz high-pass filter switch reduces low frequencies and all associated noise. In addition a -10dB Pad switch provides added headroom and minimizes distortion when capturing transient (peaking) audio signals. Specifications: Omnidirectional Polar Pattern The omnidirectional polar pattern provides a generous pickup area and effectively preserves the integrity of the audio quality. Switchable 80Hz High Pass Filter The 80Hz high-pass filter switch eliminates hum and low frequency noise, rumble, etc. -10dB Pad Switch A -10dB Pad provides additional headroom for capturing peaking audio signals without distortion and noise. Transducer Fixed-charge back plate, permanently polarized condenser Polar Pattern Omnidirectional Frequency Response 20Hz – 20kHz Dynamic Range (Typical) 132dB, 1kHz at Max SPL Signal-to-Noise Ratio 80dB, 1kHz at 1Pa Maximum Input Sound Level 146dB SPL, 1kHz at 1% T.H.D.; 156dB SPL, with 10dB pad (nominal) Power Requirements 48VDC, 3.0mA typical Output Impedance 250 ohms Output Connectors 3-pin XLR Pad -10dB Low Frequency Roll-Off 80Hz Dimensions (LxDiameter) 5.67 x 0.83″ (144 x 21mm) Weight 119g (4.2 oz) For more information, please visit this products webpage.
