Beschreibung
SA-2 Sony P2 Protocol Analyser The SA-2 consists a USB hardware interface and software to run on any IBM compatible computer running on windows 95, 98, 2000, XP. The interface box has two Sony 9 pin female RS422 connectors and one USB connector. Main FeaturesUSB Interface No Power required, Virtual Serial PortBi-directional Analysis Communications in both directionsStatic display with event counters Instant overview of operationDecoded status display Status, Commands, and Tallies in textTrace file Analysis of communications over period Command trace Trace Commands and Status changes Command mode Use to check compatibility of machineUser specified commands Check of Non Standard CommandsOn line help Function key explanation and Sony Protocol help file Controller and Device LEDs Hardware activity indicators Using the SA-2Analysing communications between Controller and Device In this mode [CMDS] must be DISABLED, the display shows both commands from the Controller and replies from the device.Analysing the performance of a DeviceIn this mode [CMDS] must be enabled and a Controller must NOT be connected. Both Commands and status requests are generated by the SA-2 software. The Status requests may be disabled to test the system.
