Beschreibung
Produktbeschreibung zur „Mikes Standard Banjo Mute“ Mike´s Banjo Mute standard (gerades) fretboard / bridge zum leisen Üben easily attached Bild 2 Slide Between StringsWith the nuts loosened, slide the feet of Mike’s Banjo Mute between the strings Bild 3 Tighten Into PlaceSlide the aluminum feet through the holes in the banjo’s bridge and then tighten the nuts to hold it in place (be careful not to over tighten Bild 4 View From The BackThis is what Mike’s Banjo Mute looks like from the back when installed HOW TO USEHold your banjo as you normally would to play. Hold the mute so the brass plate is face up and the aluminum legs point toward the head of the banjo. From the tailpiece side of the bridge slip the aluminum legs between the strings and through the cutouts of the bridge. Tighten screws to hold in place. That’s it! BUZZING PROBLEMS? The screws may not be tight enough. Tighten so the screws bend slightly. This action tilts the brass toward the tailpiece, lifting it off the strings. CAN I LEAVE THE MUTE ON MY BANJO? Your Mike’s Banjo Mute can remain on the bridge for any length of time. However, we recommend removing it before storing your banjo in a case, even a soft case, as this could put additional pressure on the banjo head. HerstellerinformationenHersteller-InformationenMikes Banjo Mute4042 W Shoreline Drive 84003 Highland UTEU-Verantwortlicher-InformationenMartin HenseBertha-von-Suttner-Weg 1324568 [email protected] und WarnhinweiseSpezifische Sicherheitshinweise, die für das Produkt gelten, sind in der Bedienungsanleitung des Produkts zu finden.
