Beschreibung
The Audio-Technica AT4051B Cardioid Condenser Microphone is ideal for professional recording and critical applications in broadcast. Featuring direct-coupled balanced outputs for clean signals in high-output conditions, the AT4051B microphone is totally free of the distortion associated with conventional transformer-coupled outputs. Its fast response to transients contributes to the open, transparent reproduction of even the most difficult-to-capture instruments.The AT4051B mic is fully RoHS-compliant—free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS). The AT4051b consists of two modular subassemblies: an AT4900b-48 body and an AT4051b-EL cardioid head capsule.Recommended uses of the AT4051B are acoustic guitar, percussion, drum overheads (mainly for cymbals), and live sound instrument recording where rear-cancellation is required.Audio-Technica AT4051B Cardioid Condenser Mic Includes:AT8405a stand clamp for 5/8″-27 threaded stands; windscreen; protective carrying caseFeatures: Specially engineered to meet the most critical acoustic requirements of professional recording, broadcast and sound reinforcement High front-to-back rejection ratio—cardioid polar pattern improves isolation of desired sound source Direct-coupled, balanced output results in a clean signal even under high-output conditions Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients Switchable 80 Hz hi-pass filter and 10 dB pad Rugged turned-brass microphone housing for enduring dependability State-of-the-art design and manufacturing techniques ensure compliance with A-T’s stringent consistency and reliability standards RoHS-compliant—free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS)Specifications: Element: Externally polarized (DC bias) capacitor Polar Pattern: Cardioid Frequency Response: 20-20,000 Hz Low Frequency Roll-Off: 80 Hz, 12 dB/octave Open Circuit Sensitivity: -34 dB (19.9 mV) re 1V at 1 Pa Impedance: 50 ohms Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal) Noise: 16 dB SPL Dynamic Range (Typical): 129 dB, 1 kHz at Max SPL Signal-To-Noise Ratio: 78 dB, 1 kHz at 1 Pa Phantom Power Requirements: 48V DC, 4.8 mA typical Switch: Flat, roll-off; 10 dB pad (nominal) Weight: 126 g (4.4 oz) Dimensions: 155.0 mm (6.10″) long, 21.0 mm (0.83″) maximum body diameter Output Connector: Integral 3-pin XLRM-type Optional Interchangeable Elements (sold separately): AT4049b-EL (Omnidirectional); AT4053b-EL (hypercardioid) Accessories Furnished: AT8405a stand clamp for 5/8″-27 threaded stands; windscreen; protective carrying case Audio-Technica Case Style: S1
