Beschreibung
The Fredenstein HD microphone preamplifier utilizes a completely new approach to microphonelevel amplification. Everybody in the recording industry is now using 96 kHz or 192 kHz samplingrates while tracking, but still using equipment, which cannot provide the frequency response orbandwidth provided by modern A/D converters. The HD Pre overcomes these limitations and yieldsa new sound quality. Especially for wider bandwidth sources, like acoustic instruments, voices, anddrums, the HD pre plays in its own league. It is the preferred choice for classical recordings aswell.Besides incorporating a fully discrete signal path and a Class-A balanced output stage, the HD Preuses a revolutionary current amplification circuit, which neutralizes limiting internal transistorcapacitors. As a result, the HD Pre features an unprecedented bandwidth of over 900 kHz. Thescreen shot below shows the -3dB point at 917 kHz.The new current amplification circuit does not need any negative feedback which improves theimpulse response dramatically. The next screen shot shows the square wave response at 106 kHz.The slew rate of the output stage is less than 400ns for a 12 Vpp output signal, which equals to 30 Volts per microsecond.The input impedance of the HD Pre is standard 200 kOhms and can be reduced to 1 KOhm byactivating the LOW-Z function. This high input impedance avoids loading the microphone outputtransformers and yields in most cases sonically superior result. In any case, the engineer can switchbetween the two settings to find the desired result without any fear of damaging the microphone.But the HD also performs excellent in more traditional amplifier tests:Unfortunately, standard audio test equipment is unable to cover the complete range of the HD Pre.Above is the frequency response of the HD: 20Hz to 20kHz within 0.1 dB, -3dB at 7Hz and 900kHz.The output reference level is + 4dBu, the standard American studio reference level.So THD plus Noise is at -71 dB at 64 dB gain which equals to an input noise of -135 dB at 50Ohms generator output impedance. The total distortion and noise ratio is excellent at 0.0082 %.
