Beschreibung
The microphones KMS 104 D and KMS 105 D are the transition of the well-established KMS 104/105 analog microphones into the digital domain. Based on the AES42 standard, these microphones are an ideal choice for live and on-stage applications. They provide all of the features of their analog counterparts. Additionally, they offer the advantages of the digital circuit technology, such as extended dynamic range, a more robust operation (EMC safe) and the avoidance of clipping as a result of the integrated peak limiter/ compressor. Use of one of the digital microphone interfaces together with the Remote Control Software (RCS) permits pre-programmed settings to be stored in the microphones.Neumann sound on stageExcellent transparency for vocals/speechCardioid/Supercardioid polar pattern with excellent feedback rejectionWithout off-axis colorationEffective pop shielding without any side effectsSet includes stand clampThe legendary Neumann sound in the digital realm. Pure Neumann capsule sound.The satisfaction of recording the uncolored original, with no „bottlenecks“ between the capsule and the recording system.The guarantee of having one of the best A/D converters available.Anti-clipping processing ensures handling safety, and reduces stress.Reduced time requirements and personnel costs, particularly due to faster post production processing.Lower investment costs, since separate A/D converters and preamps are no longer needed. This also means space and weight savings (e.g. in the OB van).Specifications KMS 104 D / KMS 105 DAcoustic transducer: Pressure gradient transducerDirectional characteristic: Cardioid/SupercardioidFrequency response: 60 Hz to 20 kHzFree-field sensitivity1):–47 dBFSEquivalent noise level, CCIR3): 27 dBEquivalent noise level, A-weighted3): 16 dB-ASignal-to-noise ratio2), CCIR3): 67 dBSignal-to-noise ratio2), A-weighted3): 78 dBMaximum SPL at 0 dBFS: 141 dBSPLDynamic range, A-weighted4): 125 dBPreset:- Sampling rates: 48 kHz – Gain: 10 dB (variable with DMI-2)- Compressor on, Attack time 100 ms, Release time 0.5 s,Threshold –10 dBFS, Ratio 2:1Supply voltage range: +6 V to +10.5 VCurrent consumption: max. 150 mAWeight: approx. 300 g, Diameter: 48 mm, Length: 180 mmGeneral Specifications of the Solution-D microphonesInterface: AES42Remote controlled functions:- Polar pattern4)- Low-cut: flat, 40, 80, 160 Hz- Pre-attenuation: 0 , -6, -12, -18 dB- Gain: 0…63 dB in 1 dB steps, clickless- Testsignal: 1 kHz, pink noise, white noise- Parametric compressor/limiter (incl. de-esser function)- Independent peak limiter avoiding any clipping- Switch functions: soft muting, phase reverse, signal lights- Signal lights: red4) and blue LEDs- System functions, firmware downloadA/D conversion: Neumann process (patented), 28-bit internal word lengthDigital signal processing: Fixed-point, variable internal word length 28 bits to 60 bitsSynchronization: – Asynchronous operation (free-running, AES42 – Mode 1), basic frequency accuracy: ± 25 ppm- Synchronous operation (AES42 – Mode 2), pulling range: Min. ± 100 ppmPower supply (phantom power complying with AES42)Output: XLR3M, 24 bits as per AES/EBU (AES3)
